Ta sekcja nie została jeszcze przetłumaczona. Poniższa treść jest wyświetlana po angielsku, w wersji opublikowanej. Przeczytaj wersję angielską.
Moog launches seal-less CoreMotion CM400 and CM28 pumps for end-of-row and in-rack CDUs
What changed
Moog says the CM400 is built for end-of-row CDUs with 250 to 500 US gallons per minute at 25 to 112 psi, and the CM28 for in-rack CDUs with up to 55.5 gallons per minute and 72.5 psi. Both are canned pumps with the drive integrated and no rotating shaft seals, which Moog says removes leak paths and seal maintenance. The CM400 is designed around the Deschutes 5.0 CDU specification and both will be shown at SC26 in Chicago from 15 to 20 November. Power ratings differ between the press release and the datasheet, so check the datasheet before sizing (official).
View original source (opens in a new tab)
Read the original: Data Center Frontier (Moog press release): Moog launches seal-less CoreMotion CM400 and CM28 pumps for end-of-row and in-rack CDUs (opens in a new tab)
We summarise in our own words and link the source. Figures are as reported by the source and not independently verified. Report a correction.
Related index data
A supplier link means the company is named in the story or offers this kind of product. It does not mean a contract unless the story says so.
More in CDUs & Direct Liquid Cooling
- ToneCooling publishes measured datasheets for GB300 and GB200 direct-to-chip cold plate kits: about 1,067 W per GPU plate at 1.7 L/min 11 Nov 2026
- ZTE launches a 1.5 MW cold plate liquid cooling CDU, expandable to 2.4 MW, alongside 800 V DC power for AI data centres 10 Nov 2026
- India's National Stock Exchange installs direct-to-chip liquid cooling for its own AI servers, planned to scale to 224 GPUs 9 Nov 2026